Flasher M3 24 V

1.007.29x.xx (choose order option)

The flasher unit start/stop M3 is used for signal and warning light applications. The flasher can be used in various vehicle types. The supply voltage is connected to terminal 30/87z. When an input voltage is applied to terminal 15 the flasher unit starts immediately, generating 90 +/-30 pulses per minute. The flasher output can switch loads up to 20 A. Higher loads may be switched with a second downstream power relay. The inverted input voltage is present on terminal 87a. Please refer to the chapter housing and base plates for additional housing options.

NameValue
Dimensions 30 × 30 × 40 mm
Housing material Plastics
Type-approval number 03 5388
Type-approval e1 - 72/245/EWG
Number of pins 5
In-/Outputs (total) 1
Operating voltage 24 V
NameValue
Number of pins 5
In-/Outputs (total) 1
Outputs (total) 1
Relay outputs 1
Processor family Texas Instruments MSP 430
Processor 16 bit
Blink frequency 90 1/min
Temperature range -40 to 85 °C
Protection class IP53
Operating voltage 24 V
Lifetime 100.000
Programming system MRS Realizer
Flashing frequency tolerance +/- 30 Impulse per min.
Name Type Connection diagram Order no.
Flasher M3 24 V A S1 1.​007.​291.​00
Flasher M3 24 V B S2 1.​007.​292.​00
Flasher M3 24 V C S3 1.​007.​293.​00
Required accessoriesArticle number
Software programming tool MRS Realizer 1.​100.​000.​01
Socket ST FL 9-pin 5 x 6.3 / 4 x 2.8 1.​017.​002.​00
Socket package watertight 40 mm 114265
Tab receptacle for latching 2,8 mm 0,5 – 1,0 mm² 105292
Tab receptacle for latching 6,3 mm 1,0 mm² 102355
Tab receptacle for latching 6,3 mm 1,5 – 2,5 mm² 103064

What are the switching thresholds for a logical "1" or a logical "0" at the trigger input (for example, KL15)?

For the 12 V and 24 V relays the switching thresholds are as follows:
Switch-on threshold => 6 V
Switch-off threshold = <3.5 V