Pulse Relay M1 compact 12 V
1.002.18x.xxE (choose order option)(100218xxxE)
Pulse relays compact find use when consumers are to be switched on or off for a defined time. Please specify the desired impulse time when ordering. Circuit diagram S1 and S2: operating voltage is applied to terminal 30. If the voltage is set at Terminal 15, the relay will immediately pull in for the specified time and then fall off again. The duration of the control signal has no effect on the output pulse duration (i.e. the relay is not retriggerable). Circuit diagram S3: Operating voltage is applied to terminal 87z. If the voltage is set at Terminal 15, the relay will immediately pull in for the specified time and then fall off again. If the control on KL. 15 is taken away before the end of the time, the relay drops off immediately. Circuit diagram S2 and S3: The contacts are separate from the control and can therefore be used in links. In this variant, the relay contact is completely potential-free and thus capable of switching alternating voltage. Housing forms can be found in the section housing and basic body.
| Name | Value |
|---|---|
| Weight | 34 g |
| Dimensions | 30 × 30 × 30 mm |
| Housing material | Plastics |
| Type-approval number | 04 7281 |
| Type-approval | E1 - ECE R10 |
| Number of pins | 5 |
| Operating voltage | 12 V |
| Name | Value |
|---|---|
| Number of pins | 5 |
| Relay outputs | 1 |
| Processor family | Texas Instruments MSP 430 |
| Processor | 16 bit |
| Temperature range | -40 to 85 °C |
| Protection class | IP53 |
| Operating voltage | 12 V |
| Max. output current (87, 87a) | 30 A |
| Quiescent current (12V) | 1 mA |
| Pulse duration | By customer request |
| Programming system | MRS Realizer |
| Name | Type | Model | Connection diagram | Order no. | ||
|---|---|---|---|---|---|---|
| Pulse Relay M1 compact 12 V | A | Individual pulse time (see below) | S1 | 1.002.181.xxE | ||
| Pulse Relay M1 compact 12 V | B | Individual pulse time (see below) | S2 | 1.002.182.xxE | ||
| Pulse Relay M1 compact 12 V | C | Individual pulse time (see below) | S3 | 1.002.183.xxE |
| Required accessories | Article number | |
|---|---|---|
| Softwaretool MRS Realizer | 1.100.000.01 | |
| Socket ST FL 9-pin 5 x 6.3 / 4 x 2.8 | 1.017.002.00 | |
| Socket package watertight 30 mm | 300047 | |
| Tab receptacle for latching 2,8 mm 0,5 – 1,0 mm² | 105292 | |
| Tab receptacle for latching 6,3 mm 1,0 mm² | 102355 | |
| Tab receptacle for latching 6,3 mm 1,5 – 2,5 mm² | 103064 |
What are the switching thresholds for a logical "1" or a logical "0" at the trigger input (for example, KL15)?
For the 12 V and 24 V relays the switching thresholds are as follows:
Switch-on threshold => 6 V
Switch-off threshold = <3.5 V
How fast is the switching time at the output from a trigger input?
The internal switching time is 50 ms